Duratec High Gloss Additive

Description

Blended with gelcoats for gelcoat repairs; blended with tooling gelcoats to upgrade mold surfaces.

Low Porosity—when  used for repairs, blending the additive with gelcoat produces a low porosity surface.

Reduced orange peel—the low viscosity of the blend results in a smooth finish that is easily sanded.

Improved properties—for mold surfaces, the blending of the additive with tooling gelcoat creates a higher heat distortion temperature, improved gloss retention, increased impact resistance and reduced subsurface porosity.

Superior finish—when blended one-to-one with gelcoats, the additive creates an air-cure, enamel-like coating. No air-dry additive is required. When used for gelcoat repair, surfaces are restored to like-new condition.

Viscosity
As measured on a Brookfield Viscometer Model RVF, Spindle #2 at 20 rpm – 110 cps

Thixotropic Index – 1

Gel Time
Sample based on a 100 g mass, catalyzed at 2 percent with mekP – 16-20 min

Weight per Gallon – 8.0 lb., 3.6 kg